DuPont Industrial Coatings

DuPont Industrial Coatings, a recognized industry leader, has been providing Coating Solutions That Work for over 80 years, and offers a premium, proven line of polyurethane, epoxies and alkyds. Designed for use for a wide array of industrial, commercial and institutional facilities and equipment, these easy to apply products can be used in tough environments and on difficult surface conditions. DuPont Industrial Coatings are available in convenient factory packaged colors or can be mixed to match any solid color.

DuPont Industrial Coatings offers a wide variety of high solids solventborne and waterborne coatings and offers many low VOC and low HAPs products. Product lines include:

Imron® - The industry's best performing polyurethane enamel

Imron® offers excellent exterior durability under many service conditions
Provides excellent gloss and color retention
Has excellent adhesion and good flexibility
Solventborne Imron® provides excellent abrasion resistance
Product line includes primers, DTM's (direct-to-metal), topcoats and clearcoats
Is available in variable gloss levels - high gloss, satin gloss, semi-gloss and flat
Application by brush, roll or spray

Corlar® Epoxies

Provides excellent chemical, solvent & water resistance
Excellent abrasion and corrosion resistance
Available in primers, DTMs (direct-to-metal) and topcoats
Corlar® 2.1 HTA™ High Temperature Aluminum Epoxy Mastic - used for high temperature applications up to 450°F continuous, 500°F intermittent.
Application by brush, roll or spray

Tufcote® Acrylics & Alkyds

Single component, easy-to-use products
Easy to apply - brush, roll or spray
Provides good exterior durability and flexibility
Good gloss retention

Ganicin® Zinc-Rich Coatings

Provides "galvanic" protection
Excellent exterior durability when topcoated
Excellent corrosion resistance
Excellent heat resistance
Surface tolerant

Specialty Coatings

DuPont WP™ Wash Primer - suitable for both carbon steel and aluminum surfaces
Tufcote® 3.5 HG-NI - high gloss, isocyanate-free, Skydrol resistant coating

DuPont Industrial Coatings can be applied to a variety of substrates in both corrosive and non-corrosive environments. System recommendations are available for carbon steel, galvanized steel, aluminum, poured concrete, concrete block, wood, fiberglass and drywall and plaster applications.

In addtion, DuPont Industrial Coatings have been used successfully in a variety of markets such as amusement and recreation, commercial and industrial equipment and facilities, construction equipment, propane gas and ready mixed concrete.