The miracles of science™
   Register      Forgot Password?

Hiding

Also known as: coverage, opacity, transparency

 

Description
When the filler, primer or sealer on the repair area is visible through the topcoat.

 

 

Origin and Potential Causes:
  • Inadequate lighting in the spraybooth.
  • Color was not well mixed/stirred.
  • Too much thinner was used.
  • Substrate's color was not correct.
  • Substrate not uniform (effect finishes).
  • Color coat has insufficient film thickness.

 

Prevention Techniques:
  • Use recommended thinner.
  • Install good lighting equipment.
  • Verify proper spray gun setup.
  • Mix/stir all colors/tintings thoroughly.
  • Use the appropriate ValueShade™ undercoat.
  • Spray sufficient color to obtain hiding.

 

Remedy
Allow the finish to properly dry, then sand and refinish.

 
Contact DuPontContact Us

Copyright © 2009 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, The miracles of science™ and all products denoted with ® or ™ are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.